Duramax CP3 vs. CP4 Fuel Pump Guide: Which Pump You Have & Why It Matters
Which GM 6.6L Duramax has the Bosch CP3 and which has the CP4.2 — why the CP4 fails catastrophically, how a CP3 conversion or disaster-prevention kit protects your LML, and the fuel filtration that keeps either pump alive.
Parts Covered in This Guide
Reliable fueling at stock or elevated power
Reliable fueling at stock or elevated power
Reliable fueling at stock or elevated power
Reliable fueling at stock or elevated power
Restoring fueling or building for power
| # | Product | Owner Reviews | Availability | Best For | |
|---|---|---|---|---|---|
| 1 | 4,290 | $21.00 In Stock at Amazon | Reliable fueling at stock or elevated power | ||
| 2 | 528 | $27.99 In Stock at Amazon | Reliable fueling at stock or elevated power | ||
| 3 | 1,166 | $18.99 In Stock at Amazon | Reliable fueling at stock or elevated power | ||
| 4 | 193 | $14.88 In Stock at Amazon | Reliable fueling at stock or elevated power | ||
| 5 | 4 | $98.99 In Stock at Amazon | Restoring fueling or building for power |
If you own a Duramax, the injection pump bolted to the front of the engine is quietly one of the most consequential parts on the truck — and which one you have depends entirely on the year. The 2001–2010 trucks carry the Bosch CP3, a pump with a near-legendary reliability record. The LML and LGH (2011–2016) carry the Bosch CP4.2, a more modern, higher-pressure pump with one well-documented and expensive failure mode. This guide explains which is which, why it matters, and what your options are — new pumps and filtration on Amazon, and used, OEM, or conversion hardware on eBay Motors.
Which Pump Does Your Truck Have?
It comes down to the model year and engine code:
- CP3 — Bosch, 2001–2010. The LB7 (2001–2004), LLY (2004.5–2005), LBZ (2006–2007), and LMM (2007.5–2010) all run the CP3. It’s a high-volume, mechanically simple pump that tolerates fuel-quality problems far better than what replaced it, and it’s the reason those generations rarely make headlines for pump failures.
- CP4.2 — Bosch, 2011–2016. The LML and the lower-output LGH run the CP4.2. It builds higher rail pressure and is more efficient — but it’s also the pump at the center of the Duramax fuel-system conversation.
- L5P (2017+) — unresolved here, and we are not going to guess. Our generations comparison lists the L5P with a Denso HP4, not the Bosch CP4.2, and we could not confirm the L5P’s pump against any manufacturer source reachable to us on 24 August 2026. Treat every L5P pump claim — including ones you read elsewhere — as unconfirmed until you have checked the pump on your own engine.
If you’re not certain of your engine code, confirm it against the generations & fitment reference before buying anything. A CP3 and a CP4 are not interchangeable without a purpose-built kit.
Why the CP4 Failure Is Such a Big Deal
The CP3 earned its reputation honestly: it’s durable, it moves plenty of fuel, and when it does wear out it usually fails gracefully. The CP4.2 is a different story — not because it’s a bad pump on paper, but because of how it fails.
The CP4 uses the diesel passing through it as its own lubricant, riding a roller follower against an internal cam. US ultra-low-sulfur diesel is drier than the fuel the pump was designed around, and if that roller ever loses proper contact with the cam — from a dry-fuel moment, marginal fuel, or ordinary wear — the pump begins grinding metal. Those shavings don’t stay put. They circulate through the high-pressure side and contaminate the rails, the lines, and every one of the eight injectors.
That’s the part owners underestimate: a failed CP4 is rarely a single-part repair. It’s frequently a full fuel-system replacement, which is exactly why prevention is the smart money on an LML.
Option 1: CP3 Conversion
The most permanent fix for the CP4’s risk is to remove the CP4 entirely and install the older CP3. A CP3 conversion kit bundles the pump, an adapter to mate it to the engine, the correct lines, and the tuning needed to disable the CP4’s low-pressure protection. For a lot of LML owners this is the definitive answer — the CP3 flows more than enough for stock and moderate-power trucks, and it retires the failure mode for good.
As with any hardware that alters the factory fuel system, some of these kits are marketed for off-road or competition use — know your local and federal emissions laws before you commit. Used and reman CP3 pumps and conversion hardware are exactly what eBay Motors is good for; use the generation-tagged buttons above.
Option 2: CP4 Disaster-Prevention (Bypass) Kit
If you’d rather keep the CP4, a disaster-prevention or bypass kit reroutes the pump’s internal return so that if it does begin to come apart, the metal debris is captured and dumped rather than pushed downstream into your injectors and rails. It doesn’t make the CP4 immortal — but it changes a catastrophic, whole-system failure into a far cheaper pump-only replacement. For a stock LML owner who doesn’t want the expense or emissions questions of a full conversion, it’s sensible insurance.
The Cheapest Protection: Fuel Filtration
Whichever pump you have, it lives or dies on fuel quality. This is the least glamorous and most effective thing you can do:
- Change the fuel filter on schedule with a quality unit. The GM genuine TP1015 filter kit and a proven aftermarket unit like the Doc’s diesel filter are the routine service parts; the maintenance schedule lays out the intervals.
- Keep the housing healthy. A cracked or leaking fuel filter housing assembly lets air and contaminants past the filter — replace it if it’s weeping.
- Respect the water-in-fuel warning. Drain water promptly, and if your sensor is flaky, the water-in-fuel indicator sensor restores the warning you actually want working.
- Never run the tank low enough to risk drawing air or sediment — the fastest way to starve either pump.
- Consider a lubricity additive, especially on CP4 trucks, to offset dry ULSD.
Clean, lubricated fuel is the difference between a pump that lasts the life of the truck and one that grenades. It’s cheaper than any pump — and far cheaper than a full fuel-system rebuild.
If the CP4 Already Failed
If your LML or LGH has already lost a CP4, plan for the whole high-pressure side: the pump, the rails, the lines, and all eight injectors should be inspected and, in most debris-failure cases, replaced. It’s a hard bill — but it’s also the natural moment to convert to a CP3 or add a disaster-prevention setup so you never do it twice. See the common problems by generation guide for how the CP4 fits the LML’s broader weak points, and the fuel-system upgrades top-list when you’re specifying the rebuild.
Where to Buy
- New pumps, fuel filters, housings, and filtration parts: Amazon Automotive — start in the fuel-system category and the recommended parts below.
- Used, OEM, and reman CP3/CP4 pumps, plus CP3 conversion and disaster-prevention kits: eBay Motors is the right marketplace for original and rebuilt pumps and conversion hardware — use the generation-tagged buttons above.
Shopping used or OEM? Try eBay Motors
Live listings for the parts covered in this guide — prices set by the seller.
Live auctions ending soon
LIVEReal-time eBay auctions · bids shown are current · tap a card to bid on eBay
Browse every live “duramax cp3 injection pump lb7 lly lbz lmm bosch” listing on eBay →
Recommended Parts for This Guide
GM Genuine Parts TP1015 (13539108) Fuel Filter Kit with Seals
4,290 owner reviews
GM Genuine Parts TP1015 (13539108) Fuel Filter Kit with Seals. Fuel-system hardware to keep the Duramax fed reliably at stock and elevated power.
- Reliable fuel delivery
- Supports higher power
Doc's Diesel Fuel Filter, Fits 6.6L Duramax Chevrolet/GMC 2500HD 2017-2026 | Independent Testing Rates It At 96.92 Percent Efficiency Down To 3 Microns
528 owner reviews
Doc's Diesel Fuel Filter DGF429 | Compatible with Chevrolet/GMC 6.6L Duramax 2500HD, 3500HD 2017-2019, Chevrolet/GMC 3.0L Duramax 2500HD, 3500HD 2020+ | Replaces TP1015. Fuel-system hardware to keep the Duramax fed reliably at stock and elevated power.
- Reliable fuel delivery
- Supports higher power
6.6L Duramax Diesel Fuel Filter Housing Assembly with Seals,Fits 2001-2016 Chevy Silverado GMC Sierra 2500HD 3500HD,2012-2016 Chevrolet Express & GMC Savana– Replaces TP3018 TP3012 12664429 12633243
1,166 owner reviews
6.6L Duramax Diesel Fuel Filter Housing Assembly with Seals,Fits 2001-2016 Chevy Silverado GMC Sierra 2500HD 3500HD,2012-2016 Chevrolet Express & GMC Savana– Replaces TP3018 TP3012 12664429 12633243. Fuel-system hardware to keep the Duramax fed reliably at stock and elevated power.
- Reliable fuel delivery
- Supports higher power
Water in Fuel Indicator Sensor, Fuel Filter Sensor Compatible with 2001-2011 Silverado Sierra Truck 2500 2500HD 3500 3500HD 6.6L V8 Duramax Diesel Engine Fuel Filter (12-Sided)
193 owner reviews
Water in Fuel Indicator Sensor, Fuel Filter Sensor Compatible with 2001-2011 Silverado Sierra Truck 2500 2500HD 3500 3500HD 6.6L V8 Duramax Diesel Engine Fuel Filter (12-Sided). Fuel-system hardware to keep the Duramax fed reliably at stock and elevated power.
- Reliable fuel delivery
- Supports higher power
0445120082 Fuel Injector Fit for GMC Chevy Duramax 6.6L 2007-2010 | Fit for Express 2500 3500 4500 Savana 2500 3500 4500 Silverado Sierra 2500 HD 3500 HD Replace 0986435520 98002368 19208742
4 owner reviews
0445120082 Fuel Injector Fit for GMC Chevy Duramax 6.6L 2007-2010 | Fit for Express 2500 3500 4500 Savana 2500 3500 4500 Silverado Sierra 2500 HD 3500 HD Replace 0986435520 98002368 19208742. Fuel injector hardware for the GM Duramax diesel — restore stock fueling or step up to high-flow injectors for more horsepower.
- Restores stock fueling
- High-flow options for power